Tweco Victor Torch Handles,Cutting Attachments - Manual (Page 5)

1-1
sectIoN 1:
INtRoDUctIoN
This booklet is a guide to the safe and efficient operation of apparatus
used in oxy-fuel applications. If the apparatus is not used in an oxy-
fuel application, the operator must still follow safety and operating
procedures that apply. Usage presents several potential hazards. Read
this booklet thoroughly and carefully before operating this equipment.
All operations should conform to applicable Federal, State, County, or
City regulations for installation, operation, ventilation, fire prevention,
and protection of personnel. ANSI Standard Z49.1, “Safety in Welding
and Cutting" contains detailed safety instructions. It is available from the
American Welding Society, P.O. Box 351040, Miami, FL 33135.
A system of notes, cautions, and warnings emphasize important safety
and operating information in this booklet:
note
Conveys installation, operation, or maintenance information which
is important but not hazard-related.
CaUtion
Caution indicates a potentially hazardous situation which, if not
avoided, may result in injury.
warning
warning indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
warning
Do not attempt to use this apparatus until you thoroughly read
and understand all safety and operating instructions provided. For
your safety, practice the safety and operating procedures described
in this booklet every time you use the apparatus. Deviating from
these procedures may result in fire, explosion, property damage
and/or operator injury. If at any time the apparatus you are using
does not perform in its usual manner, or you have any difficulty in
the use of the apparatus, StoP using it immediately. Do not use
the apparatus until the problem has been corrected!