Tweco Victor Torch Handles,Cutting Attachments - Manual (Page 7)

2-3
5. Move combustible materials away from the work site. If you can
not move them, protect them with fireproof covers.
warning
NEVER perform welding, heating, or cutting operations
on a container that has held toxic, combustible or flammable
liquids, or vapors. NEVER perform welding, heating, or cutting
operations in an area containing combustible vapors, flammable
liquids, or explosive dust.
2.02 hoUsekeepING
warning
NEVER allow oxygen to contact grease, oil, or other flammable
substances. Although oxygen by itself will not burn, these
substances become highly explosive. They can ignite and burn
violently in the presence of oxygen.
Keep ALL apparatus clean and free of grease, oil, and other flammable
substances.
2.03 veNtILAtIoN
warning
Adequately ventilate welding, heating, and cutting work areas
to prevent accumulation of explosive or toxic concentrations
of gases. Certain combinations of metals, coatings, and gases
generate toxic fumes. Use respiratory protection equipment in these
circumstances. When welding/brazing, read and understand the
Material Safety Data Sheet for the welding/brazing alloy.
2.04 peRsoNAL pRotectIoN
Gas flames produce infrared radiation which may have a harmful effect on
the skin and especially on the eyes. Select goggles or a mask with tempered
lenses, shaded 4 or darker, to protect your eyes from injury and provide
good visibility of the work.