Tweco 9-9515 - Manual (Page 2)

December 7, 2006 2 Manual 0-4952 Rev. AA.01
PC Board Removal
WARNINGS
Disconnect primary power at the source before starting the procedure.
Use caution when handling the printed circuit board as damage can result from improper handling or from electro-
static discharge. Wear appropriate static-handling equipment and grounding strap while performing this replace-
ment procedure.
1. Remove the screws securing the cover panel to the gas control module. Save the hardware for re-use.
2. Remove the cover from the module.
Art # A-06882
Gas Control Module Cover
Do not remove