One touch fitting replacement – Tweco 9-9515 User Manual
Page 6
Advertising
December 7, 2006
6
Manual 0-4952 Rev. AA.01
One Touch Fitting Replacement
1. Locate the two 90° One Touch elbow connections shown in the illustration below. Disconnect the black air
tubes from the fittings. Using an open end wrench or your fingers, depress the locking ring on the fitting and
pull the tube to release it from the fitting.
2. Remove the elbows. For the one on the right in this illustration, you will need to place an open end wrench on
the brass "T" fitting to keep it from turning while removing the elbow.
Remove 90°
fitting here
Place wrench here
to avoid movement
from this fitting while
removing 90° fitting.
Remove 90°
fitting here
Art # A-07616
One Touch Elbow removal. Some items removed for clarity.
Advertising