Viking Pump TSM312: G-N 32/432 - Manual (Page 9)

SECTION TSM 312 ISSUE G PAGE 9 OF 11
When installing carbon graphite bushings, extreme care
must be taken to prevent breaking. Carbon graphite is a
brittle material and easily cracked. If cracked, the bushing will
quickly disintegrate. Using a lubricant and adding a chamfer
on the bushing and the mating part will help in installation.
The additional precautions listed below must be followed for
proper installation:
1. A press must be used for installation.
2. Be certain bushing is started straight.
3. Do not stop pressing operation until bushing is in proper
position. starting and stopping will result in a cracked
bushing.
4. Check bushing for cracks after installation.
INSTaLLaTION OF CaRBON
gRaPHITE BUSHINgS
PRESSURE RELIEF VaLVE
INSTRUCTIONS
VaLVE - LIST OF PaRTS
1. Valve Cap 6. Valve Body
2. Adjusting Screw 7. Valve Spring
3. Lock Nut 8. Poppet
4. Spring Guide 9. Cap Gasket
5. Bonnet 10. Bonnet O-ring
FIgURE 15 - SECTIONaL VIEW, SEaL aREa FIgURE 16 - SIZE g, H aND HL
FIgURE 17 - SIZE aK aND aL
FIgURE 18 - SIZE K, KK, L, LQ aND LL
SET COLLaR
WITH
SETSCREW END CaP
SEaL ROTaRY MEMBER
SPRINg
SPRINg WaSHER
.06 FOR MODEL H432 & HL432
.12 FOR MODEL g432
SEaL
SEaT