Canon DR-9080C - Manual (Page 105)

101
Other functions Automatic paper size detection, Paper thickness and double
feed detection, Staple detection, Skew detection, Dropout color,
Count only mode
Dimensions 12.2" (H) x 18.1" (W) x 20.7" (D)/
312 mm (H) x 460 mm (W) x 525 mm (D)
Weight Approximately 55.1 lb (25 kg)
Power requirement AC 220-240V (50/60 Hz), 0.6A (max)
AC 120V (60 Hz), 1A (max)
Power consumption
220-240 V model Operating: 0.5 A maximum
Standby: Under 0.23 A
120 V model Operating: 1 A maximum
Standby: Under 0.23 A
Noise Less than 70 dB
Operating environment Temperature: 50°F to 90.5°F (10°C to 32.5°C)
Humidity: 20% to 80% RH
● You can use the functions noted above if the software supports them.
● They may not work depending on your computer’s capabilities and the
software you are using.
● If the scanning conditions are set to duplex scanning, color scanning, or high
density (600 dpi) scanning, then large documents such as 11" x 17" size paper
and A3 size paper cannot be scanned. Change the scan conditions to scan
these sizes.
Specifications are subject to change without notice.
Options
Imprinter Prints a variety of text messages on the front of the scanned
document.
Endorser Endorses a variety of text messages and a six digit number on
the back of the scanned document.
Hard Counter Counts the number of pages fed through the scanner.
Bar Code Module Add on software that allows bar codes to be recognized by the
ISIS/TWAIN driver.
● When using the endorser, the scanning speed lowers to match the printing
speed of the endorser.
● Ink cartridge for the imprinter is not included. Please purchase the Hewlett-
Packard ink cartridge.
● Contact your sales representative for information about optional products.
Specifications