Rear view, Connectors (bottom view) – Canon DR-9080C User Manual
Page 18
Advertising
14
Chapter 1
DR-7580/9080C
◆ Rear View
Air Vent
Power Cord Connector
Connect the power cord provided with
the scanner to this connector.
Connectors
To avoid overheating and causing a fire, never block the air vents on the rear of the
scanner.
◆ Connectors (Bottom View)
SCSI Connectors
Connect a half-pitch 50 pin (pin type)
SCSI cable. (See p.19.)
USB Connector
Connect a Hi-Speed USB 2.0
compatible cable. (See p.22.)
DIP Switch
This switch is for setting the SCSI ID
and turning ON or OFF the terminator.
(See p.20.)
CAUTION
Advertising
This manual is related to the following products: