Canon DR-9080C - Manual (Page 66)

62
Chapter 5 Other Functions
How to Set the User Mode
Use the following procedure to set user modes.
1
Press both the [New File] key and the [Count Only] key at the same
time.
The New File key and the Count Only key flash, and the counter display shows
the user mode.
2
Press the [New File] key, and then select a user mode (U01 to U11).
3
Press the [Count Only] key to select the mode (last digits only).
4
Press the [Stop] key when the settings are complete.
The mode you selected is set, and the counter returns to the page count display.