Canon DR-9080C - Manual (Page 31)

27
2
Turning ON/OFF the Power
Follow the procedures below to turn ON or OFF the scanner power.
Turning ON the Power
Be sure to turn ON the power of all connected SCSI devices before you turn ON the
computer.
1
To turn ON the scanner, press the power switch.
“00000” is displayed on the counter display of the operation panel.
If you hear a strange sound, detect smoke or abnormal heat, sense vibration, or
smell odd odors around the scanner, turn OFF the power immediately and
disconnect the power cord from the power outlet. Contact your service
representative immediately. Failure to do so might cause a fire.
2
Turn ON the computer.
When you connect the scanner to the computer, you need to make Windows
recognize the scanner when you first start up Windows. (See “Recognizing the
Scanner”, on p.28.)
WARNING
Important
Note
2.4 Turning ON/OFF the Power