Canon DR-9080C - Manual (Page 57)

53
4
3
When counting ends, press the [Count Only] key to cancel the
count only mode.
To clear the number on the counter display, press the [Count Only] key,
then press the [Stop] key down for at least two seconds. (See p.15.)
You can use the count only mode to count the number of documents and do “Verify
scan” (checking the number of documents scanned against the number of
documents counted). For details on verify scan, refer to “ISIS/TWAIN Driver
HELP.”
Using Patch Code Sheets
Patch code sheets are sheets of paper on which a special pattern is printed so
that files can be separated without stopping the scanning operation. The scanner
can recognize the pattern on these sheets, which allows files to be separated.
● Refer to “ISIS/TWAIN Driver HELP” when using patch code sheets.
● Patch code sheets are enabled only when the application being used for scanning
supports file separation.
◆ Patch Code Sheets
Patch code sheets are PDF (portable document format) data of which there are
four types, [PATCH II (A4)], [PATCH II (LTR)], [PATCH T (A4)], and [PATCH T
(LTR)]. Click on the [Start] button in Windows, and then click [Programs] – [Canon
DR-6080 & 7580 & 9080C] – [PATCH X(XX)], and use the document that is
printed.
You need CapturePerfect or an application that can open PDF (portable document
format) files.
Note
Note
Note
4.2 Document Feeding and Scanning