Monarch Instrument DC6000 - Manual (Page 53)

Section 5 – Recorder Setup
I.
Page 45
1/06/2012 REV 1.10.2
Test Dialog: This window enables you to test your
calculation after the recorder has compiled it. The
original calculation is shown in the top line. There
are entry boxes to enable you to set actual values for
the channel variables. Once you have entered data,
pressing the Calculate button will display the
answer in the line above it. This test dialog
can also be used to evaluate functions or
any other expression entered.
If the answer is as expected or you need to go back
and alter the formula press the Exit
button.
Once the calculation has been tested correctly, return to the main setup window and press the Exit
button.
Figure 5-7 Test Dialog Window