Monarch Instrument DC6000 - Manual (Page 89)

Section 5 – Recorder Setup
I.
Page 81
1/06/2012 REV 1.10.2
Fig 5.7.5.1 – System Activity Logs
Fig 5.7.5.2 – Log File Save
Delete: Select a user from the list and press DELETE to remove the user permanently.
OK: Accepts the changes and exits.
Cancel: Exits the dialog without making changes.
5.7.5 System Activity Logs
This feature allows the user to export the internal system activity
logs to removable media for archiving for analysis purposes or
delete them to clean up the system.
From the Admin menu tap the System Activity Log
Archive button shown here.
Activity Log Enable
– when this box is checked the unit will
track all activity that takes place in the recorder, whether directly
from the front panel or remotely over the Ethernet
There are four files/folders that can be exported or deleted:
Alarm, Event and Activity logs are described in
Section 4.3
above. Activity Data is the configuration files that are generated
when a user logs in or out and are used to track changes made
to the system configuration.
To erase the logs, select those you wish to erase by checking the boxes alongside them and
press the erase button shown right.
Caution: This process is permanent. Always save the files to removable media before erasing if you require
this information.
To export/save the logs check the boxes alongside the files you wish to export/save and press
the save file button shown right. This will bring up the Log File Save dialog window shown
below.
Media – Use this dropdown menu to select the desired
destination media.
Folder - Choose an existing folder or name a new one in this
text box. Note you will be creating a folder into which all the
files/folder you selected will be saved.
OK: Saves the files/folder and exits. When the save
is complete a popup box will appear. Select OK
Cancel: Exits the dialog without saving.