Monarch Instrument DC6000 - Manual (Page 97)

Section 6 - Communication
I.
Page 89
1/06/2012 REV 1.10.2
The recorder name is shown in bold at the top of the page – “Process Recorder”. If any channel is in alarm this name
will be in red as shown, otherwise it will be in blue. Each channel data is shown as a digital panel indicator. The actual
value is shown in the center in large digits. Below this are the unit tags (in blue) and the engineering units. Above to
the right of each panel display is the physical channel number. In the event that a channel is in Alarm, this will be
shown in the upper left in large red letters as in the case of Channel 2. The live data updates every 3 to 5 seconds.
There are a number of buttons below the live data display. “Chan 7-12” and “Chan 1-12” show those channels – 7 to
12 or all channels 1 to 12. “View Recorder” shows the actual recorder display as seen at the recorder itself as shown
below. This updates every 5 seconds.
Figure 6.1.2 – Index Page
Figure 6.1.3 – View Recorder Page