Wheatheart WHR 130 x 41ft Auger PTO-SD - Manual (Page 15)

WHEATHEART - GHR & WHR GRAIN AUGERS 3. A SSEMBLY
GRAIN AUGERS 3.1. P RE -A SSEMBLY
30661 R2 15
3. Assembly
3.1. PRE-ASSEMBLY
Before beginning assembly, familiarize yourself with all the sub-assemblies and
hardware making up the auger. Have all parts on hand and arrange them for
easy access. Carry out assembly in a large open area with a level surface.
Important: Always have 2 or more people assembling the equipment. Because of the
weight, do not attempt assembly alone.

Augers are available in various combinations. In most cases, the following
instructions will apply to all augers. Where the assembly information varies,
additional instructions will be included and will be indicated with an arrow.
3.2. TUBES & FLIGHTING
1. Position tube sections. Align tube sections on a flat surface or on a series of
benches.
Note: When assembling more than 2 sections, start from spout end and work towards
hopper.
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
WARNING
Do not drop. Damage to equipment or serious
personal injury will result.