Wheatheart WHR 130 x 41ft Auger PTO-SD - Manual (Page 40)

6. M AINTENANCE & S TORAGE WHEATHEART - GHR & WHR GRAIN AUGERS
6.1. G ENERAL M AINTENANCE P ROCEDURES GRAIN AUGERS
40 30661 R2
Winch
Note: Service
winch with auger in
fully lowered posi-
tion and cable
slack.
Keep a film of grease on gears. Regularly
Oil the ratchet pawl pivot, bushings, and pinion threads.
Do not get oil or grease on brake discs.
Occasionally
Replace brake discs if less than 1/16” thick. As required
Check for proper ratchet pawl operation.
When cranking in (clockwise) = loud clicking
When cranking out (counterclockwise) = no clicking and
ratchet pawl fully engaged into gear teeth
Regularly
Truss Cables Adjust to keep auger tube reasonably straight. As necessary
Area Maintenance Frequency