Transport – Wheatheart Post Pounder User Manual

Page 21

Advertising
background image

W

HEATHEART

- P

OST

P

OUNDER

3. T

RANSPORT

H

IGH

& H

EAVY

H

ITTER

AND

H

IGH

& H

EAVY

H

ITTER

P

LUS

IM4 R3

21

3. Transport

Follow this procedure when placing the unit into its transport position:

1. Prepare for transport and connect to towing unit

Trailer Model: attach the unit to the tractor/towing unit with a pin, retainer,

and safety chain.

3pt Side Mast Model: attach the unit to Category II 3-point hitch and

secure with pins.

3pt Center Mast Model: attach the unit to Category I or II 3-point hitch

and secure with pins.

Skid Steer Model: attach and pin to skid steer loader adapter.

Important:

Use caution when turning corners or meeting traffic.

2. Before transporting, position the pounder mast head into the fully lowered

position (Figure 2.1).

3. Trailer Model: fully extend the hitch cylinder

4. All 3pt Models: fully raise 3-point hitch unit

5. Skid Steer / 3pt Center Mast Model: ensure transport locks have hairpins

installed with the mast centered and top cylinder retracted

6. Lock out all power to the post pounder
7. Make sure the SMV (Slow Moving Vehicle) emblem and all the lights and

reflectors that are required by the local authorities are in place, are clean,
and can be seen clearly by all traffic.

8. Consult with local authorities regarding transport on public roads. Obey all

applicable laws and regulations.

Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.

WARNING

Skid steer pounder should only be raised high
enough to allow for safe transport. DO NOT
raise pounder above the skid steer loader
cab. Refer to skid steer loader operation
manual for further details.

WARNING

Do not attempt to move the unit by hand. Only
move when hitched securely to tow vehicle,
tractor, or skid steer loader.

Advertising