Wheatheart Post Pounder - Manual (Page 25)

W HEATHEART - P OST P OUNDER 5. O PERATION
H IGH & H EAVY H ITTER AND H IGH & H EAVY H ITTER P LUS 5.1. P RE -O PERATION C HECKLIST
IM4 R3 25
5. Operation
5.1. PRE-OPERATION CHECKLIST
Efficient and safe operation of this unit requires that each operator reads and
understands the operating procedures and all related safety precautions outlined
in this manual.
Before operating the unit, and each time thereafter, the following should be
reviewed:
• Follow the service schedule.
• Check hydraulic system oil level.
• Ensure that all hydraulic lines are free from damage, and that all fittings
are tight.
• Visually inspect the unit for damage to components. Replace or repair any
damaged or questionable parts.
• Check the work site and clean up the area, if needed.
• Use only a tractor, towing vehicle, or skid steer loader of adequate power
and capacity to operate the machine.
• Check that all guards are installed, secured, and functioning as intended.
Do not operate with missing or damaged guards. Keep guards in good
working order.
• Ensure that the plastic slides are intact on the pounder mast (HH Plus
only) and slide box.
• Ensure that the machine is securely attached to the towing vehicle, trac-
tor, or skid steer loader.
• Consult local utility companies to identify the location of buried power/gas
lines.
• Each day before using the machine, ensure that the pounder head bolts
are torqued to 760 lb-ft.
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
NOTICE
Ensure that the pounder is attached to equipment that has
sufficient capacity to tow or lift the machine.
Refer to Section 9.3. for pounder specifications.