Wheatheart Post Pounder - Manual (Page 23)

W HEATHEART - P OST P OUNDER 4. P LACEMENT
H IGH & H EAVY H ITTER AND H IGH & H EAVY H ITTER P LUS 4.1. P LACING A P OST P OUNDER
IM4 R3 23
4. Placement
4.1. PLACING A POST POUNDER
Follow this procedure when placing the machine into its working position:
1. Review the work area safety diagram (Figure 2.2, Figure 2.3) for your model
prior to starting work. Follow all set-up instructions and do not allow any
unauthorized people into the working area.
2. Be sure there is enough clearance from overhead obstructions, power lines,
or other equipment to move the machine into its working position.
3. Set the park brake on the towing unit, tractor, or skid steer loader before
dismounting
4. Remove all transport locks.
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
WARNING
Skid steer and 3pt pounders must have all
support legs securely on the ground before
using machine.
WARNING
Use extreme care and minimum ground
speed when operating or transporting on
hillsides, over rough ground, or near ditches
or fences.
WARNING
Stay away from overhead or buried power
lines. Arcing and possible electrocution can
occur without direct contact.
Consult local utility companies before
operating machine near power lines or buried
gas lines.