Shutdown, Pto d, Warning – Wheatheart Post Pounder User Manual

Page 30

Advertising
background image

5. O

PERATION

W

HEATHEART

- P

OST

P

OUNDER

5.5. S

HUTDOWN

H

IGH

& H

EAVY

H

ITTER

AND

H

IGH

& H

EAVY

H

ITTER

P

LUS

30

IM4 R3

5.5. SHUTDOWN

E

NGINE

D

RIVE

M

ODELS

:

1. After completing the job, ensure that the pounder mast is in the lowered

position.

2. Lean the mast back into the transport position. Fully extend hitch cylinder.
3. Reduce engine speed to a low idle to allow motor to cool off.
4. Once

motor

has cooled down, shut engine off.

PTO D

RIVE

M

ODELS

1. After completing the job, ensure that the pounder mast is in the lowered

position.

2. Lean the mast back into the transport position. Fully extend hitch cylinder (if

equipped).

3. Reduce PTO speed and turn off PTO/power source.

S

KID

S

TEER

/ T

RACTOR

S

UPPLIED

H

YDRAULIC

M

ODELS

:

1. After completing the job, ensure that the pounder mast is in the lowered

position.

2. Lean the mast back into the transport position.
3. Place the hydraulic control lever in neutral to shut off flow of oil to pounder

hydraulic valve. Remove key or lock out power source and then install
hairpins on the transport lock.

WARNING

DO NOT let impact head free fall without
pounding a post.

If head must be lowered, shut off and lock out
power source and gently actuate hydraulic
valve to lower head.

Advertising