Maintenance – Wheatheart Post Pounder User Manual
Page 31
W
HEATHEART
- P
OST
P
OUNDER
6. M
AINTENANCE
H
IGH
& H
EAVY
H
ITTER
AND
H
IGH
& H
EAVY
H
ITTER
P
LUS
IM4 R3
31
6. Maintenance
Before performing any maintenance on this unit, shut off and remove key or lock
out power source, and ensure the mast is in the lowered and transport position.
Figure 6.1 Head Bolt
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.
Table 6.1
MAINTENANCE PROCEDURE
DAILY
WEEKLY
ANNUALLY
Check Head Bolts For Tightness (Figure 6.1) (Torque Should
Be 760 lb-ft)
-
-
Check Cylinder Bolts For Tightness
-
-
Tighten Mast Cylinder Cap
-
-
Check Hugger Plastic Rollers And Replace If Damaged
-
-
Check Plastic Slide Plates To Ensure In Place
-
-
Grease All Areas
-
-
Check Mast And Slide Bolts For Tightness
-
-
Check Hydraulic Filter
-
-