Great Plains 30-Foot High Clearance Full Press Drill 1983-1985 Parts Manual - Manual (Page 33)

Revision Comments Part Description Part No. Ref.
Image No. dwg18200
TONGUE ASSEMBLY 103-001H 1.
PULL BAR ASSEMBLY 111-001H 2.
ADJ. CLEVIS ASSEMBLY 111-002H 3.
NUT HEX JAM 1 1/4-7 PLT 803-032C 4.
PIN CLEVIS 1 X 2 3/4 USABLE LG 805-004C 5.
PULL BAR SLIDE ASSEMBLY 111-005H 6.
TONGUE PIN ASSEMBLY 114-013H 7.
PIN LINCH 5/16 X 1 3/4 805-015C 8.
HHCS 1/2-13X5 1/2 GR5 802-046C 9.
NUT LOCK 1/2-13 PLT 803-019C 10.
HHCS 1-8X6 1/2 GR5 802-074C 11.
WASHER LOCK SPRING 1 PLT 804-027C 12.
NUT HEX 1-8 PLT 803-031C 13.
HITCH ASSEMBLY 103-004H 14.
LOWER BAR - HITCH 103-020D 15.
HHCS 1-8X4 GR5 802-073C 16.
Includes items 12 through 16. HITCH ASSEMBLY 103-005K 17.
SCREW JACK 30' DRILLS 890-007C 18.
JACK REPAIR PINS 890-019C 19.
PIN HITCH 1 X 6 W/HAIRPIN 805-033C 20.
PIN CLEVIS 1 X 2 3/4 USABLE LG 805-004C 21.
12/26/12 - 33 - 129-035P
Table of Contents Part Number Index
Frame
Tongue And Pull Bar Assembly
(Applies to HCF30 (1980-1985) only)