Great Plains 30-Foot High Clearance Full Press Drill 1983-1985 Parts Manual - Manual (Page 71)

Revision Comments Part Description Part No. Ref.
Image No. dwg18254
Shown 10 OPENER PIVOT TB ASS'Y LH 129-011H 1.
10 OPENER PIVOT TB ASS'Y RH 129-012H 1.
HALF CLAMP 105-029D 2.
HHCS 1/2-13X1 1/4 GR5 802-034C 3.
WASHER LOCK SPRING 1/2 PLT 804-015C 4.
NUT HEX 1/2-13 PLT 803-020C 5.
PIN W/HAIRPIN COTTER 6.
UPPER OPENER FRAME PIN ASS'Y 114-002H 7.
WASHER FLAT 3/4 SAE PLT 804-025C 8.
PIN COTTER 3/16 X 1 1/4 PLT 805-016C 9.
HC DISK OPENER FRAME 131-015H 10.
PIVOT ANGLE ASSEMBLY LH 131-004H 11.
U-BOLT 1/2-13X4X5 GR5 12.
PIVOT BAR 131-007D 13.
HHCS 3/4-10X3 1/2 GR5 802-066C 14.
NUT HEX 3/4-10 PLT NYLOCK 803-025C 15.
PIVOT ANGLE ASSEMBLY RH 131-005H 16.
12/26/12 - 71 - 129-035P
Table of Contents Part Number Index
Openers and Opener Frames
Pivot Tube Assembly - Disk Opener Frame (1980 <-> 1981)
(Applies to HCF30 (1980-1985) only)