Great Plains 30-Foot High Clearance Full Press Drill 1983-1985 Parts Manual - Manual (Page 85)

Revision Comments Part Description Part No. Ref.
Image No. dwg18244
Shown 10 OPENER PIVOT TB ASS'Y LH 129-011H 1.
10 OPENER PIVOT TB ASS'Y RH 129-012H 1.
12 OPENER PIVOT TB ASS'Y LH 129-013H 1.
12 OPENER PIVOT TB ASS'Y RH 129-014H 1.
HALF CLAMP 105-029D 2.
HHCS 1/2-13X1 1/4 GR5 802-034C 3.
WASHER LOCK SPRING 1/2 PLT 804-015C 4.
NUT HEX 1/2-13 PLT 803-020C 5.
HHCS 5/8-11X1 3/4 GR5 802-053C 6.
NUT LOCK 5/8-11 PLT 803-024C 7.
UPPER OPENER FRAME PIN ASS'Y 114-002H 8.
WASHER FLAT 3/4 SAE PLT 804-025C 9.
PIN COTTER 3/16 X 1 1/4 PLT 805-016C 10.
TOP WIND OPENER FRAME JACK;
2nd rev.
890-075C 11.
OPNR FRM JACK RPL BY 890-075C;
1st rev.
890-033C 11.
HC JACK SUPPORT PLATE 129-017D 12.
HC OPENER JACK SUPPORT 129-016D 13.
OPENER FRAME GAUGE 129-023D 14.
HHCS 5/8-11X2 GR5; 2nd rev. 802-055C 15.
RPBY 802-055C; 1st rev. 802-054C 15.
WASHER LOCK SPRING 5/8 PLT 804-022C 16.
NUT HEX 5/8-11 PLT 803-021C 17.
PIVOT ANGLE WELDMENT RH 132-028H 18.
U-BOLT 5/8-11 X 4 X 5 1/4 806-008C 19.
PIVOT WELDMENT 132-005H 20.
PIVOT ANGLE WELDMENT LH 132-006H 21.
PIVOT ANGLE RH 132-075D 22.
PIVOT ANGLE LH 132-006D 23.
HHCS 3/4-10X3 1/2 GR5 802-066C 24.
NUT HEX 3/4-10 PLT NYLOCK 803-025C 25.
HHCS 3/4-10X4 GR5 802-068C 26.
Shown HC HOE FRAME LEFT & CENTER 10 132-001H 27.
ST HOE FRAME RH 10 132-026H 27.
HC HOE FRAME LEFT & CENTER 12 132-002H 27.
ST HOE FRAME RH 12 132-027H 27.
12/26/12 - 85 - 129-035P
Table of Contents Part Number Index
Openers and Opener Frames
Pivot Tube Assembly - Spring Trip Hoe Opener Frame (1982)
(Applies to HCF30 (1980-1985) only)