Great Plains 30-Foot High Clearance Full Press Drill 1983-1985 Parts Manual - Manual (Page 83)

Revision Comments Part Description Part No. Ref.
Image No. dwg18252
Shown 10 OPENER PIVOT TB ASS'Y LH 129-011H 1.
10 OPENER PIVOT TB ASS'Y RH 129-012H 1.
Shown 12 OPENER PIVOT TB ASS'Y LH 129-013H 1.
12 OPENER PIVOT TB ASS'Y RH 129-014H 1.
HALF CLAMP 105-029D 2.
HHCS 1/2-13X1 1/4 GR5 802-034C 3.
WASHER LOCK SPRING 1/2 PLT 804-015C 4.
NUT HEX 1/2-13 PLT 803-020C 5.
PIN W/HAIRPIN COTTER 6.
UPPER OPENER FRAME PIN ASS'Y 114-002H 7.
WASHER FLAT 3/4 SAE PLT 804-025C 8.
PIN COTTER 3/16 X 1 1/4 PLT 805-016C 9.
Shown HC HOE FRAME LEFT & CENTER 10 132-001H 10.
ST HOE FRAME RH 10 132-026H 10.
Shown HC HOE FRAME LEFT & CENTER 12 132-002H 10.
ST HOE FRAME RH 12 132-027H 10.
PIVOT ANGLE WELDMENT RH 132-028H 11.
U-BOLT 5/8-11 X 4 X 5 1/4 806-008C 12.
WASHER LOCK SPRING 5/8 PLT 804-022C 13.
NUT HEX 5/8-11 PLT 803-021C 14.
PIVOT WELDMENT 132-005H 15.
HHCS 3/4-10X3 1/2 GR5 802-066C 16.
NUT HEX 3/4-10 PLT NYLOCK 803-025C 17.
PIVOT ANGLE RH 132-075D 18.
PIVOT ANGLE LH 132-006D 19.
PIVOT ANGLE WELDMENT LH 132-006H 20.
HHCS 3/4-10X4 GR5 802-068C 21.
12/26/12 - 83 - 129-035P
Table of Contents Part Number Index
Openers and Opener Frames
Pivot Tube Assembly - Spring Trip Hoe Opener (1980 <-> 1981)
(Applies to HCF30 (1980-1985) only)