Install primary seed hoses, Approximate primary hose lengths – Great Plains CTA4000 Predelivery Manual User Manual
Page 27
Great Plains Manufacturing, Inc.
Setup
23
2013-08-21
160-037Q
Install Primary Seed Hoses
Primary seed hose is 2
1
⁄
2
inches (6.4 cm) in diameter
and is supplied in a 100-foot (30.5 m) roll. The raw hoses
will be cut-to-length to connect each distribution tower
inlet on the implement to a meter-box outlet on the cart.
Material Loss Risk:
Do not cut hose until routed over implement. Lengths in table
are approximate. Actual lengths will vary from cart to cart and
implement to implement.
Approximate Primary Hose Lengths
Tower
To ADC1150
To ADC2220
To ADC3250
1
350 inches (8.89m)
296 inches (7.52m)
297 inches (7.54m)
2
212 inches (5.38m)
176 inches (4.47m)
177 inches (4.50m)
3
180 inches (4.57m)
144 inches (3.66m)
145 inches (3.68m)
4
212 inches (5.38m)
176 inches (4.47m)
177 inches (4.50m)
5
350 inches (8.89m)
296 inches (7.52m)
297 inches (7.54m)