Great Plains CTA4000 Predelivery Manual - Manual (Page 3)

Great Plains Manufacturing, Inc. Cover Appendix iii
2013-08-21 Cover Appendix 195-325M
© Copyright 1998, 2006, 2007, 2009, 2013 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information ......................................1
Introduction ..................................................................3
Implements Covered ......................................................3
Document Family ...........................................................3
CTA4000 with ADC2350 ........................................3
CTA4000 with ADC2220 ........................................3
CTA4000 with ADC1150 ........................................3
CTA4000HD with ADC2350 ...................................3
CTA4000HD with ADC2220 ...................................3
CTA4000HD with ADC1150 ...................................3
Description of Unit ..........................................................4
Intended Usage ..........................................................4
Using This Manual..........................................................4
Definitions...................................................................4
Product Support .........................................................4
Preparation ...................................................................5
Assembly ................................................................5
Setup ......................................................................5
Tools Required ...............................................................5
Pre-Assembly Checklist .................................................5
Assembly ......................................................................6
Assemble Casters ..........................................................7
Mount Gauge Wheels.....................................................8
Mount Fold Cylinders .....................................................9
Mount Valve / Plumb Wings .........................................10
Setup ...........................................................................11
Hitching ........................................................................11
Cart Differences........................................................11
Hitching an ADC2350 Cart....................................... 12
ADC2350 Hitch Link ............................................. 12
ADC2350 Electrical Connections ............................. 12
ADC2350 Hydraulic Connections............................. 13
Hitching an ADC2220 or ADC1150 Cart .................. 14
ADC2220/1150 Hitch Link .................................... 14
ADC2220/1150 Electrical Connections .................... 14
Make ADC2220/1150 Hydraulic Connections ..... 15
Bleeding Hydraulics ..................................................... 16
Bleeding Lift Hydraulics............................................ 16
Bleeding Fold Hydraulics ......................................... 18
Eyebolt Adjustment ...................................................... 20
Install Distribution Towers ............................................ 21
General Tower Installation ....................................... 21
Center Tower Installation ......................................... 22
Wing Tower Installation............................................ 22
Install Primary Seed Hoses.......................................... 23
Approximate Primary Hose Lengths .................... 23
Primary Seed Hose Routing..................................... 24
Connect Secondary Seed Hoses ................................. 25
Secondary Hoses, 6 inch (15.2 cm) Row Spacing... 27
Secondary Hoses, 7.5 inch (19.1 cm) Row Spacing 28
Secondary Hoses, 10 inch (25.4 cm) Row Spacing. 29
Appendix..................................................................... 30
Torque Values Chart .................................................... 30
Tire Inflation Chart ....................................................... 30
Hydraulic Diagram ....................................................... 31
CTA4000 or CTA4000HD Hydraulic Circuit Assign-
ments................................................................ 31