Great Plains CTA4000 Predelivery Manual - Manual (Page 8)

4 CTA4000 & CTA4000HD Table of Contents Appendix Great Plains Manufacturing, Inc.
160-037Q Table of Contents Appendix 2013-08-21
Description of Unit
The CTA4000/HD is a semi-mounted pull-type air drill
implement for volumetric seeding. A fan on the
companion air cart creates an airflow to supply seed and
dry granular treatments to the implement.
Intended Usage
Use this machine only in conjunction with a Great Plains
air drill cart. Use this machine for seeding
production-agriculture crops only. Use this machine in
conventional- or minimum-tilled fields.
Using This Manual
This manual was written to help you assemble and
prepare the new machine for the customer. The manual
includes instructions for assembly and setup. Read this
manual and follow the recommendations for safe,
efficient and proper assembly and setup.
An operator’s manual is also provided with the new
machine. Read and understand “Important Safety
Information” and “Operating Instructions” in the
operator’s manual before assembling the machine. As a
reference, keep the operator’s manual on hand while
assembling.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the current topic. Read
and follow the directions to remain safe, avoid serious damage
to equipment and ensure desired field results.
Useful information related to the preceding topic.To order
additional copies of pre-delivery instructions or
operator’s and parts manuals, write to the following
address. Include model numbers in all correspondence.
Note: If you do not understand any part of this manual or
have other assembly or setup questions,
assistance is
Product Support
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
Figure 2
Left/Right Notation
26254
L
R
U
D
F
B
L
R
U
D
F
B
L
R
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276