Great Plains 3N-4020 Operator Manual - Manual (Page 23)

Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 19
2013-10-29 Table of Contents Index 196-359M
Install Weight Brackets (Option)
If weight brackets were ordered, and were not
dealer-installed, install them now. Two kits (4 brackets)
are supported, accepting five standard 100 pound (45
kg) “suitcase” tractor weights each, for a maximum addi-
tional weight of 2000 pounds (907 kg). Weights are not
included with kits.
If only one weight kit is to be installed, use the “Outer”
position.
Once the brackets are installed, see “Frame Weight” on
page 68 for operating information.
Install Outer Brackets
Start with the left wing.
Refer to Figure 15
1. Select two:
806-172C U-BOLT 3/4-10 X 10 1/32X11 1/2
From the front of the wing, insert the U-Bolts
through the holes in the outside lug
.
2. Select one:
196-291H 40P WEIGHT BRACKET WLDMNT
and four sets:
804-023C WASHER LOCK SPRING 3/4 PLT
803-027C NUT HEX 3/4-10 PLT
Mount the bracket weldment on the U-Bolts ,
and secure with lock washers and nuts .
3. Select one:
197-062D WEIGHT BRACKET ADJ LEG
and two sets:
802-057C HHCS 5/8-11X2 1/4 GR5
804-019C WASHER FLAT 5/8 USS PLT
804-022C WASHER LOCK SPRING 5/8 PLT
803-021C NUT HEX 5/8-11 PLT
Orient the adjustment leg toward the outside (end of
wing), and secure with bolts , flat washers , lock
washers and nuts .
4. Repeat step 1 through step 3 for the right wing.
Figure 14:
Weight Bracket Kit and Weights
27068
Figure 15
Weight Bracket, Outer
20323
1
11
16
17
14
19
12
18
15
13
U
D
L
R
B
F
19
19
1
11
18
15
11 19
18 15
12
13
16
17
14
12
13 16
17 14