Great Plains 3N-4020 Operator Manual - Manual (Page 62)

58 3N-4010F/3N-4010HDF/3N-4020F Table of Contents Index Great Plains Manufacturing, Inc.
196-359M Table of Contents Index 2013-10-29
Precision Population Settings
1.
Connect PF3000 to Console using 9 pin serial cable
per Figure 83 on page 57.
2. Set Calibration Number per page 39.
Refer to Figure 84
3. Press FUNCTION button until a “recipe” screen
appears. Use the
⇑ / ⇓ arrow buttons to select RAW-
SON mode.
Refer to Figure 82
4. Press FUNCTION button until the Nominal Rate
appears on the display.
Using the
⇑ / ⇓ arrow buttons, set the Nominal Rate to
the same number as you set the PF3000 in step 5
above. Once Nominal Rate is set, press FUNCTION
key until main operating screen appears.
5. Press On/VR key again to toggle to VR mode. VR
should appear on the screen along with the Rate that
is being sent from the PF3000. Verify that the rate
shown on the GP Controller Console is the same as
the recipe sent from the PF3000.
Press ENGAGE button to activate the Precision Pop-
ulation Controller.
6. To change rates manually when in VR mode, simply
touch the
⇑ / ⇓ arrow buttons. This changes the Con-
troller to the rate you select manually. To return to
VR, touch the ON/VR button to toggle back to VR
mode.
Figure 84: PF3000:
Rawson Recipe Mode
28320
Figure 85: SiteMate:
Rawson Nominal Rate
28323