Acremeter operation – Great Plains 1300 13-Foot Operator Manual User Manual
Page 31
Great Plains Manufacturing, Inc.
Operating Instructions
27
2014-04-15
175-157M
Acremeter Operation
The acremeter
a
counts shaft rotations whenever the
shaft is rotating - normally this is only with the drill
lowered and in motion. The meter is programmed to
display rotations as acres or hectares, when using all
rows, factory-specified tires and tire inflations.
Note: Unusual conditions and/or non-standard row
spacings can cause the acremeter tally to vary
somewhat from actual acres planted.
Refer to Figure 23
Acremeters supplied with model 1300/F drills have
varied over time. For operational details (modes, resets,
calibration), see the manual supplied with the acremeter:
a. An electronic acremeter is available as an upgrade for older drills having a mechanical acremeter.
Meter Style and Manual
194-074M
152-314M
152-325M
194-209M
Figure 23
Acremeters
34776
34937
27378
36275
1
2
3
4
1
3
2
4