Important safety information, Transport machinery safely, Use safety lights and devices – Great Plains 2S-2600F Operator Manual v2 User Manual

Page 4: Practice safe maintenance, Use a safety chain

Advertising
background image

2

Important Safety Information

2S-2600 and 2S-2600F Two-Section Folding Drill 195-200M-A

9/26/13

Great Plains Mfg., Inc.

Transport
Machinery Safely

Maximum transport speed for imple-
ment is 20 mph. Some rough terrains
require a slower speed. Sudden
braking can cause a towed load to
swerve and upset.
▲ Do not exceed 20 mph. Never

travel at a speed which does not
allow adequate control of steering

and stopping. Reduce speed if
towed load is not equipped with
brakes.

▲ Comply with state and local laws.

▲ Do not tow an implement that,

when fully loaded, weighs more
than 1.5 times the weight of tow-
ing vehicle.

▲ Fold drill only when tractor and

drill are stopped and the tractor
park brake is set.

Use Safety
Lights and Devices

Slow-moving tractors, self-propelled
equipment and towed implements
can create a hazard when driven on
public roads. They are difficult to see,
especially at night.
▲ Use flashing warning lights and

turn signals whenever driving on
public roads.

▲ Use lights and devices provided

with implement.

Practice Safe Maintenance

▲ Understand procedure before

doing work. Use proper tools and
equipment. Refer to this manual
for additional information.

▲ Work in a clean, dry area.

▲ Lower implement to ground, put

tractor in park, turn off engine and
remove key before performing
maintenance.

▲ Allow implement to cool completely.

▲ Inspect all parts. Make sure parts

are in good condition and installed
properly.

▲ Remove buildup of grease, oil or

debris.

▲ Remove all tools and unused

parts from implement before oper-
ation.

Use A Safety Chain

▲ Use a safety chain to help con-

trol drawn machinery should it
separate from tractor drawbar.

▲ Use a chain with a strength rat-

ing equal to or greater than the
gross weight of towed machin-
ery.

▲ Attach chain to tractor drawbar

support

or

other

specified

anchor

location.

Allow

only

enough slack in chain to permit
turning.

▲ Replace chain if any links or end

fittings are broken, stretched or
damaged.

▲ Do not use safety

chain for towing.

Advertising
This manual is related to the following products: