Important safety information, Prepare for emergencies, Tire safety – Great Plains 2S-2600F Operator Manual v2 User Manual

Page 5: Wear protective equipment, Avoid high pressure fluids hazard, Safety at all times

Advertising
background image

3

Important Safety Information

9/26/13

2S-2600 and 2S-2600F Two-Section Folding Drill 195-200M-A

Great Plains Mfg., Inc.

Prepare for Emergencies

▲ Be prepared if a fire starts.

▲ Keep a first aid kit and fire extin-

guisher handy.

▲ Keep emergency numbers for

doctor, ambulance, hospital and
fire department near phone.

Tire Safety

Tire changing can be dangerous and
should be performed by trained per-
sonnel using correct tools and equip-
ment.
▲ When inflating tires, use a clip-on

chuck and extension hose long
enough to allow you to stand to
one side–not in front of or over tire
assembly. Use a safety cage if
available.

▲ When removing and installing

wheels,

use

wheel-handling

equipment adequate for weight
involved.

911

Wear
Protective Equipment

▲ Wear protective clothing and

equipment.

▲ Wear clothing and equipment

appropriate for the job. Avoid
loose-fitting clothing.

▲ Because prolonged exposure to

loud noise can cause hearing
impairment or hearing loss, wear
suitable hearing protection such
as earmuffs or earplugs.

▲ Because operating equipment

safely requires your full attention,
avoid wearing radio headphones
while operating machinery.

Avoid High
Pressure Fluids Hazard

Escaping fluid under pressure can
penetrate

skin,

causing

serious

injury.
▲ Avoid the hazard by relieving

pressure

before

disconnecting

hydraulic lines.

▲ Use a piece of paper or card-

board, NOT BODY PARTS, to
check for suspected leaks.

▲ Wear protective gloves and safety

glasses or goggles when working
with hydraulic systems.

▲ If an accident occurs, see a doc-

tor immediately. Any fluid injected
into the skin must be surgically
removed within a few hours or
gangrene may result.

Safety at All Times

Thoroughly read and understand this
manual before operating implement.
Refer to Safety Decals, page 4. Read
all instructions noted on decals.
▲ Be familiar with all implement

functions.

▲ Operate implement from driver’s

seat only.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Do not dismount a moving tractor.

Dismounting a moving tractor could
cause serious injury or death.

▲ Do not use drill tires as a step.

Tires rotate easily when not in
contact with ground.

▲ Do not stand between tractor and

implement during hitching.

▲ Keep hands, feet and clothing

away from power-driven parts.

▲ Wear snug-fitting clothing to avoid

entanglement with moving parts.

▲ Make sure all persons are well

away before raising openers or
folding drill.

▲ Watch out for wires, trees, etc.,

when raising and folding drill.

▲ Do not turn tractor too tight, caus-

ing implement to ride up on
wheels.

Advertising
This manual is related to the following products: