Great Plains 2S-2600F Operator Manual v2 - Manual (Page 58)

56
Section 6 Options
2S-2600 and 2S-2600F Two-Section Folding Drill 195-200M-A 9/26/13
Great Plains Mfg., Inc.
Seed Cup Plugs
Seed-cup plugs are available to block off individual rows
when a wider row spacing is desired. Plugs are installed
by pushing them into the seed-cup openings on desired
rows.
Seed Cup Plugs
817-087C 1 3/4 Wide Feeder Cup Plug
15642
Shaft Monitor
The shaft monitor is an electronic monitoring system that
detects when the seed-cup shafts stop turning. If a seed-
cup shaft stops for 30 seconds, an alarm sounds and a
warning light flashes to designate the failed shaft.
For more information refer to:
•
Shaft Monitor Operation, “Operating Instructions,”
page 21
Shaft Monitor Bundle
116-121A Vansco 3-Channel Shaft Monitor
13178
24454
Weight Kit
It will be necessary to purchase an additional weight kit
if you choose not to use markers with your HD00 Series
3S-4000 drill.
To order an additional Weight Kit, contact your Great
Plains dealer.
Weight Kit
171-097A 26/30/4000 Dual HD Weight Kit
171-099A 26/30/4000 Single HD Weight Kit