Safety decals, Safety reflectors and decals, 055c slow moving vehicle reflector – Great Plains NTA3010 Operator Manual User Manual
Page 10: 266c red reflectors
6
NTA3010 and NTA3510
Great Plains Manufacturing, Inc.
160-219M-A
2014-03-26
Safety Decals
Safety Reflectors and Decals
Your drill comes equipped with all lights, safety reflectors
and decals in place. They were designed to help you
safely operate your drill.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1.
Clean the area on which the decal is to be placed.
2.
Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
Center of rear frame tube;
1 total
838-266C
Red Reflectors
On rear face of rear fold arms near pivot,
on each side, rear face of top rear weight frame;
4 total
17160
16371