Great Plains NTA3010 Operator Manual - Manual (Page 66)

160-219M-A Table of Contents Index 2014-03-26
62 NTA3010 and NTA3510 Table of Contents Index Great Plains Manufacturing, Inc.
Appendix
Specifications and Capacities
NTA3010 NTA3510
-3610 -4875 -4010 -5575
Operating Width 30 feet (9.1 m) 36 feet (11 m)
Swath
360 inches
(914.4 cm)
364 inches
(924.6 cm)
400 inches
(1016.0 cm)
416.5 inches
(1057.9 cm)
Number of Rows 36 48 40 55
Nominal Row Spacing 10 inch (25.4 cm) 7.5 inch (19.1 cm) 10 inch (25.4 cm) 7.5 inch (19.1 cm)
Swath Averaged Row
Spacing
10.1 inches
(25.7 cm)
7.58 inches
(19.3 cm)
10.0 inches
(25.4 cm)
7.57 inches
(19.2 cm)
Tractor Requirements
275 hp (205 Kw) - power requirements will vary with tractor size,
soil type, terrain and tillage practices
Drill Weight
a
a. Does not include air cart. See “Frame Weight” on page 41 for weights per row with and without optional weights.
15,700 lbs
(7121 kg)
17,650 lbs
(8006 kg)
16,500 lbs
(7484 kg)
18,800 lbs
(8528 kg)
Max. Additional 6000 lbs (2722kg)
Hydraulic Circuits
3 circuits required: load-sensitive or closed-center
15 to 30 gpm at 2000 psi (38 to 76 liter/min at 138 bar)
Hitch dedicated dual-link from leading ADC3250 air cart
Transport Width 16 feet 10 inches (5.13 m)
Transport Height
12 ft.6 in. (3.8 m) without markers
12 ft. 6 in. (3.8 m) with typ. markers
13 ft. 10 in. (4.22 m) without markers
14 ft. 4 in. (4.37 m) with typ. markers
Operating Height (operating height clearance is determined by air cart)
Length 16 feet (4.88 m)
Overall Length
w/ADC2350 Cart
32 feet (9.75 m)
Wing Flexibility 15 degrees down, 20 degrees up
Tire Sizes 11L-15SL 12-Ply