Great Plains 2420P Operator Manual - Manual (Page 36)

2410P and 2420P
118-769M 2012-04-17
34
Changing Seed Meter Wheels
Choose the correct seed meter wheel for the type
of seed you will be using. Be sure to use the same
wheel type on all meters.
To change seed meter wheels:
Refer to Figure 39
1. Shut off seed flow to meters by moving sliding
seed tubes. For more information see page
32.
Refer to Figure 40
2. Clean out meter. For more information see
page 33.
Refer to Figure 41
3. Push in spring-loaded wheel retainer and
turn. Pull off wheel retainer and spring.
Figure 39
Sliding seed tubes shut off
18298
Sliding seed
tubes
Figure 4
Meter clean out
19190
Figure 40
Meter clean out
19190
Wheel retainer
and spring
Figure 41
Remove wheel retainer and spring
18294