Great Plains 2420P Operator Manual - Manual (Page 79)

2012-04-17 118-769M
77 Veris Drive Operating Instructions
Crop Row
Spacing
Meter Meter
Part Number
Minimum
Rate
Maximum
Rate
Calibration #
Oats 7.5” PSS Vol #3 403-094D 55.8 148.3 8.77
Oats 10” PSS Vol #3 403-094D 55.8 148.3 6.65
Oats 15” PSS Vol #3 403-094D 55.8 148.3 4.39
Rye 7.5” Wheat Narrow 403-060D 29.8 155.7 4.69
Rye 10” Wheat Narrow 403-060D 29.8 155.7 3.55
Rye 15” Wheat Narrow 403-060D 29.8 155.7 2.34
Rye 7.5” Wheat Wide 403-085D 65.9 178.8 10.36
Rye 10” Wheat Wide 403-085D 65.9 178.8 7.85
Rye 15” Wheat Wide 403-085D 65.9 178.8 5.18
***Field speed may affect actual rate per acre with volumetric meters. Once you enter the calibration number you
must then operate the drive in the Calibration to ensure that you are obtaining the desired rate per acre. Refer to in-
structions for operation of the Calibration Routtine.
****817-529C Flow Gate must be used in conjuction with 403-095D and 403-142D rice wheels.
NOTE: When calibrating, make sure that you choose a calibration speed that is representative of your average plant-
ing speed.
Calibration Table (Cont)