Great Plains DICKEY-john AI100 10-inch Virtual Terminal - Manual (Page 12)

OPERATOR’S MANUAL
10" Virtual Terminal
11001-1440-200701
10 / VT DISPLAY
Figure 7
Touch Screen Keypad
Using the Rotary Knob:
Text strings can be customized by selecting the position of the character to
be changed, then changing the character.
1. Use the rotary knob to navigate up and down the VT to select the text
string for editing. Rotating the knob will cause the outline box to
sequence through all available text strings that are editable.
2. Push the knob once to select the text string for editing.
3. Rotate the knob to sequence through all available characters. The
available characters are a combination of upper and lower case letters,
along with various symbols.
4. Once the desired character has been selected, push the knob to save.
5. Repeat the process until all characters have been selected.
6. Press the checkmark to save, ‘X’ to cancel.
CHECK BOXES
Using the Touch Screen:
1. Touch the input box to activate the selection and press again to
deselect.
Using the Rotary Knob:
1. Scroll knob to select.
2. Press knob in to insert checkmark and press again to deselect.
X
! @ # $ % ^ & * ( ) _ +
Q W E R T Y U I O P { }
A S D F G H J K L : l
Z X C V B N M < > ? ~ ->l
CAP Ext RET Del Clr
Active setting
CORN
(MATRL 4)
Previous
setting
. .
Active
keys
bold and
in grey
box
Non
active
keys