Great Plains DICKEY-john AI100 10-inch Virtual Terminal - Manual (Page 19)

OPERATOR’S MANUAL
10" Virtual Terminal
11001-1440-200701
VT DISPLAY / 17
DATE AND TIME SETUP
The Date and Time appears at the bottom left corner of the VT.
To change the Date and Time setting press the Date and Time Setup
button.
The current system date and time displays at the top of the screen. The new
date and time is displayed secondary and will change when the left arrow
(decreases) or right arrow (increases) are pressed.
Press the SD Card button to accept the changes.
IMPORTANT: The GPS application must be enabled for date and time
stamps to appear in the alarm log. Reference the
Additional Applications section for verifying GPS is
enabled.
Figure 13
Date and Time Setup Screen
SD
Date and Time Setup button
SD Card button