Great Plains DICKEY-john AI100 10-inch Virtual Terminal - Manual (Page 3)

OPERATOR’S MANUAL
10" Virtual Terminal
11001-1440-200701
10” VIRTUAL TERMINAL (VT) / 1
10” VIRTUAL TERMINAL (VT)
The Virtual Terminal (VT) is tested and inspected to ensure the unit is fully
operational and meets all measurement specifications. After unpacking,
inspect for damage that may have occurred during transit. Save all packing
materials until inspection is complete. If damage is found, immediately file a
claim with the carrier. Also notify your DICKEY-john Sales Representative.
The 10” Virtual Terminal (VT) is mounted inside the tractor cab and is the
main user interface with the IntelliAg system.
NOTE: This manual describes basic
display settings independent of
applications. Refer to the
operator’s manual of the
connected device for
application-specific details.
The VT consists of:
• A 480 pixel x 480 pixel color graphics display
• Rotary knob
• Eight software-defined keys (using softkey buttons)
• Escape key
VIRTUAL TERMINAL/DISPLAY
• Touch screen navigation and entry
• Large, user-friendly softkeys
• Color icons for easy identification
• Backlit graphics display for nighttime use
• Backlight intensity adjustment
• Large, concise error messages with audible alarm
• English or metric measurements
• Data port (currently used to support VT reprogramming and selected
modules, when necessary).
Figure 1
10” Virtual Terminal