Great Plains DICKEY-john AI100 10-inch Virtual Terminal - Manual (Page 34)

OPERATOR’S MANUAL
10" Virtual Terminal
11001-1440-200701
32 / TRACTOR ECU
ALARMS
Various alarm conditions can be presented during Work mode whenever the
system encounters an abnormal condition or detects a specifically set alarm
point.
NOTE: Setting any limit to 0.0 will
disable the alarm.
AUDIO
An audio indicator alarm will beep 3 times and will appear on the TECU
Work screen until the condition is no longer active.
The following is a listing of audio indicators that can be configured:
• PTO speed high
• PTO speed low
• Ground speed high
• Ground speed low
• Wheel slip high
Figure 25
Audio Alarm Indicators
High Low
PTO Speed Hi/Lo
Ground Speed Hi/Lo
Wheel Slip High