Great Plains 3S-5000HDF Assembly Instructions - Manual (Page 9)

Install Valves Front Page Appendix Great Plains Manufacturing, Inc. 9
2013-04-09 Front Page Appendix 113-890M
Mount Selector Valve
Refer to Figure 14 (shown without fittings)
38. Examine the valve mount plate
on the top of the
tongue near the hitch. If the plate is unused, continue
at step 39.
If one or two valves are already mounted at the plate
(or installation of one or more two-outlet kits is
pending), mounting the marker selector valve will
require a set of separately-provisioned Grade 5
3 ⁄
8
-16 hex head cap screws, of suitable length.
39. Select one new:
810-274C DOUBLE SELECTOR VALVE 3/4FORB
and two sets new:
802-168C HHCS 3/8-16X3 1/4 GR5
804-013C WASHER LOCK SPRING 3/8 PLT
803-014C NUT HEX 3/8-16 PLT
40. With the MJIC ends of the elbows pointing forward,
attach the selector valve to the mount plate present
on the forward end of the tongue.
Note: If other valves are present, or to be installed on
this plate, they all need to be stacked using
separately provisioned hardware.
41. Set the selector valve to Markers (handle at front
stops). This minimizes oil seepage when the existing
fold hoses are connected at step 51.
Install Sequence Valve
Configure Sequence Valve
Refer to Figure 15
42. Select one new:
810-422C VALVE,SEQ SHOEMAKER HI FLO
and four new:
811-169C EL 9/16MJIC 9/16FJIC
On the side of the valve with four MJIC ports,
attach the elbows facing outward (toward the
ends of the valves with the adjustment bolts ).
U
D
F
B
L
R
183
149
157
165
5
Figure 14
Selector Valve on Tongue
18937
5
183
149
165
157
183
184
L
R
F
B
D
U
188
6
Figure 15
Sequence Valve Fittings
34783
184
188
184
188
6