Great Plains ADI445 Operator Manual - Manual (Page 17)

15
Section 1 Assembly and Setup
5/11/05 Model 2250 Air Drill Implement 160-192M
Great Plains Mfg., Inc.
Folding Hydraulics
Hydraulic Hose Sizes
Item Part Number I.D. Length
1 811-553C 3/8" 85"
2 811-556C 3/8" 85"
3 811-555C 3/8" 55"
4 811-557C 3/8" 108"
5 811-237C 3/8" 174"
6 811-583C 3/8" 158"
9 811-630C 3/8” 44”
Folding Hydraulics
Figure 1-8
Installing Fold System
Figure 1-7
15111
Refer to Figure 1-8:
Install hydraulic hoses. Note the hose lengths and be sure
to use the correct length hose in each location. Start with
the longest hose and work to the shortest.
Be sure to use the provided cable ties to help route the hy-
draulic hoses so that they will not get pinched or worn from
folding, unfolding, raising, or lowering the implement. Do
not let the hoses rub on sharp edges and make sure there
is enough slack for down-flex.
NOTE: The SAE O-Ring and JIC 37˚ flare type hose
connections do not require sealant for reconnecting.
They do not require high torque for a good seal.
Folding Hydraulics
Hydraulic Hose Sizes
Item Part Number I.D. Length
1 811-558C 3/8" 85"
2 811-556C 3/8" 85"
3 811-555C 3/8" 55"
4 811-557C 3/8" 108"
5 811-237C 3/8" 174"
6 811-583C 3/8" 158"
9 811-630C 3/8” 44”
Hydraulic Cylinders
7 810-292C 5" 7
8 810-309C 4" 8
Fittings & Misc.
Item Description
10 TEE 3/4 FJIC 3/4 MJIC 3/4 MJIC
11 ELBOW 3/4 MJIC 3/4 MOR
12 1” FOLD CYLINDER PIN
13 1” FLAT WASHER
14 3/16 X 1 3/4 COTTER PIN
15 1 1/4 CLEVIS PIN
16 TEE 3/4 MJIC 3/4 MOR 3/4 MJIC
17 1 1/4 FOLD CYLINDER PIN
18 1 1/4” FLAT WASHER
19 3/16 X 2 COTTER PIN
15150