Great Plains ADI445 Operator Manual - Manual (Page 5)

3
Important Safety Information
5/11/05 Model 2250 Air Drill Implement 160-192M
Great Plains Mfg., Inc.
818-055C
Slow Moving Vehicle Label
15078
838-266C
Red Reflector
Located on each lift as-
sist arm.
15098
838-265C
Amber Reflector
Safety Labels
Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels.
4. Some new equipment installed during repair require safety
labels to be affixed to the replaced component as specified
by the manufacturer. When ordering new components make
sure the correct safety labels are included in the request. To
order new labels go to your Great Plains dealer.
5. Refer to this section for proper label placement.
To install new labels:
a. Clean the area where the label is to be placed.
b. Peel backing from label. Press firmly on surface
being careful not to cause air bubbles under label.
15104