Great Plains 3S-3000HDF Predelivery Manual - Manual (Page 7)

Introduction 5
12/09/2009 195-068Q
Using This Manual
This manual was written to help you assemble and
prepare the new machine for the customer. This man-
ual includes instructions for assembly and setup. Read
this manual and follow the recommendations for safe,
efficient and proper assembly and setup.
An Operator’s Manual is also provided with the new
machine. Read and understand Important Safety Infor-
mation and Operating Instructions in the Operator’s
Manual before assembling the machine. As a refer-
ence, keep the Operator’s and Parts manuals on hand
while assembling.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in this manual are
determined by facing the direction the machine will
travel while in use unless otherwise stated.
Paragraphs in this format present a crucial point of informa-
tion related to the current topic.
Read and follow the directions to:
- remain safe,
- avoid serious damage to equipment and
- ensure desired field results.
Note: Paragraphs in this format provide useful informa-
tion related to the current topic.
Assembly and Setup Assistance
To order additional copies of predelivery instructions or
operator’s and parts manuals, write to the address
below. Include model numbers in all correspondence.
If you do not understand any part of this manual or
have other assembly or setup questions, assistance is
available. Contact:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276
Figure 2
Left/Right Notation
15485
L
R