Great Plains NTA3007HD Predelivery Manual - Manual (Page 11)

Unloading the Racks 7
03/29/2010 166-207Q
Unloading the Racks
Refer to Figure 8 and Figure 9
Opener Rack
REMOVE RH and LH OPENER SECTIONS (from
each side of rack).
1. Hoist rack onto its side as shown by attaching chains
to 4 points:1 eyelet hook
on each side of the rack
and to the two bolts on the top opener section
frame.
2. Unbolt opener section closest to the floor.
3. Lift rack with 2 remaining opener sections up and
away from the section you just unbolted.
4. Hoist rack to its opposite side.
5. Unbolt the other opener section now closest to the
floor.
REMOVE CENTER OPENER SECTION (from middle
of rack)
6. Secure 4 straps at 4 points on center section opener
assembly.
7. Unbolt and lift it out of rack.
Figure 8
Unbolt Bottom Opener Assembly
from Rack
7623
1
2
3
5
1 2
4
5
3
Figure 9
Chain Placement For Hoisting Rack
On Its Side
7624
4