Great Plains NTA3007HD Predelivery Manual - Manual (Page 52)

48 NTA907HD
166-207Q 03/29/2010
Assemble Hitch
(see Parts Manual page: Hitch)
Refer to Figure 85
Air Drill Hitched to Tractor
(see Operator Manual section: “Preparaton and Setup -
Hitching Tractor to Air Drill”)
Refer to Figure 86
Adjust the NTA907HD drill hitch to match your tractor
draw bar height, using crank of tongue jack on side of
tongue.
The precise height is not critical, as the NTA907HD drill
leveling is set at the mainframe and is independent of
tongue level.
Hitch Failure Risk:
The hitch may be mounted inverted if necessary, but always
have two (2) bolts in two holes of both tongue and hitch.
Figure 85
Assemble Hitch
29335
Figure 86
Air Drill Hitched to Tractor
29522