Great Plains NTA3007HD Predelivery Manual - Manual (Page 7)

Important Safety Information 3
03/29/2010 166-207Q
Practice Safe Maintenance
▲ Understand procedure before doing work. Use proper
tools and equipment. For brake work, see specific safety
information in the Operator Manual.
▲ Work in a clean, dry area.
▲ Unfold and lower the drill, put tractor in park, turn off
engine, and remove key before performing maintenance.
▲ Make sure all moving parts have stopped and all system
pressure is relieved.
▲ Allow drill to cool completely.
▲ Disconnect battery ground cable (-) before servicing or
adjusting electrical systems.
▲ Welding: Disconnect battery ground. Protect hydraulic
lines. Avoid fumes from heated paint.
▲ Inspect all parts. Make sure parts are in good condition
and installed properly.
▲ Remove buildup of grease, oil or debris.
▲ Remove all tools and unused parts from air drill before
operation.
Safety At All Times
Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on
the safety decals.
▲ Be familiar with all air drill functions.
▲ Operate machinery from the driver’s seat only.
▲ Do not leave drill unattended with tractor engine running.
▲ Do not stand between the tractor and drill during hitching.
▲ Keep hands, feet and clothing away from power-driven
parts.
▲ Wear snug-fitting clothing to avoid entanglement with mov-
ing parts.
▲ Watch out for wires, trees, etc., when folding and raising air
drill. Make sure all persons are clear of working area.