Great Plains NTA3007HD Predelivery Manual - Manual (Page 9)

Introduction 5
03/29/2010 166-207Q
Getting Started
Refer to Figure 2
Forklift
A forklift or overhead hoist is required with 2,950 kg
(6,500-pound) capacity.
Refer to Figure 3
Racks
Racks were built to facilitate transporting the drill. Parts
of the drill have been secured to the racks by various
bolts and metal binding.
Refer to Figure 4
Manuals
The black case holding the drill manuals is attached to
the drill and is weather resistant. Remove the Operator
Manual and Parts Manual to assist you in assembling the
NTA907HD drill.
You may want to go to the internet to print off a copy of
the DICKEY-john
®
Quick Start Guide to assist you in
assembling the electric parts of this drill:
http://www.greatplainsmfg.com/manuals/pdf/nta907qsg.pdf
Figure 2
Forklift
0303
Figure 3
Empty Rack (Cart Rack)
7663
Figure 4
Operator Manual and Parts Manual
0322