Bin rack – Great Plains NTA3007HD Predelivery Manual User Manual
Page 13
Advertising
Unloading the Racks 9
03/29/2010
166-207Q
Bin Rack
1.
Remove all loose parts inside the bins.These parts
will be necessary in the assembly of the drill.
2.
The metal face plate
is only used for bolting to
shipping rack. The 4 hex bolts
that attach the
metal plate to the bin will be removed so the lid
assembly can be attached to the hoppers later.
Refer to Figure 12
3.
Unbolt the other set of 4 bolts
(2 each side) that
attach the metal face plate to the rack.
Figure 11
Bin With Metal Face Plate
for Bolting to Rack
7656
2
2
2
2
1
1
2
Figure 12
Unbolt Bin From Rack
7658
3
3
3
Advertising
This manual is related to the following products: